Initialization [10/2018 - 10/2019]

HINT: 

If the mobilephone battery has been replaced, it is necessary to perform the Reset mobilephone battery Condition procedure.

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Telematics / Utility / Backup Battery Replacement Reset

   Body Electrical > Telematics > Utility 

   Tester Display
   Backup Battery Replacement Reset

5. According to the display on the Techstream, perform Backup Battery Replacement Reset to reset the mobilephone battery replacement flag.