LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> UX 200 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Smart Access System W/ Push-Button Start (Start Function) (Diagnostic Codes & Symptom Tests (1 Of 2)) (Except Hybrid) >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function, Gasoline Model) >> DTC B2278: Engine/Power Switch Malfunction [10/2018 - 07/2022] >> Description

DTC B2278: Engine/Power Switch Malfunction [10/2018 - 07/2022]: Description

This DTC is stored when the SSW1 contact signal and SSW2 contact signal, which are detected when the engine switch is operated, do not match.

DTC No. Detection Item DTC Detection Condition Trouble Area Note
B2278 Engine/Power Switch Malfunction When the engine switch is operated, the SSW1 contact signal and SSW2 contact signal do not match (1-trip detection logic*).
  • Engine switch
  • Certification ECU (smart key ECU assembly)
  • Wire harness or connector
 DTC Output Confirmation Operation: 
  1. Turn the engine switch on (IG).
  1. *: Only detected while a malfunction is present.
VEHICLE CONDITION AND FAIL-SAFE FUNCTION WHEN MALFUNCTION DETECTED

Vehicle Condition when Malfunction Detected Fail-safe Function when Malfunction Detected
If either the SSW1 contact signal or SSW2 contact signal is stuck on, the power source mode cannot be changed by pressing the engine switch. If either the SSW1 contact signal or SSW2 contact signal is stuck off, emergency stop by pressing and holding the engine switch for 2 seconds or more cannot be operated. -
RELATED DATA LIST AND ACTIVE TEST ITEMS

DTC No. Data List and Active Test
B2278 Power Source Control 
  • Start Switch1
  • Start Switch2
scientia non olet · About LEMON Manuals