LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> RX 450h Base >> Repair and Diagnosis (Single Page) >> Restraints >> Restraints Control Systems >> Pre-Collision System Warning Buzzer (Service Information) >> Pre-Collision System Warning Buzzer >> Removal [10/2015 - 08/2016] >> Procedure

Removal [10/2015 - 08/2016]: Procedure

  1. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY WITH MAIN BODY ECU 

    Refer to REMOVAL [10/2015 - 08/2016]

  2. REMOVE SKID CONTROL BUZZER ASSEMBLY 
    1. Using a clip remover, disengage the clamp.
      GTY653730Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector to remove the skid control buzzer assembly.
      NOTE:

      If the skid control buzzer assembly has been struck or dropped, replace it with a new one.

scientia non olet · About LEMON Manuals