Precaution [08/2016 - 08/2019]

INITIALIZATION

NOTE:

Before replacing the ECM, refer to Registration.
Refer to REGISTRATION [09/2015 - 08/2019]
Perform Registration (VIN registration) after replacing the ECM.
Refer to REGISTRATION [09/2015 - ]
Make sure to perform Reset Memory (A/T initialization), when replacing the automatic transaxle assembly, ECM or engine assembly.
- for 2WD models: Refer to INITIALIZATION [08/2016 - 08/2019]
- for AWD models: Refer to INITIALIZATION [09/2015 - 08/2019]

When the cable is disconnected from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.

System Name	See Procedure
LKA/LDA System	Refer to INITIALIZATION [08/2016 - 12/2017] , or refer to INITIALIZATION [12/2017 - 08/2019]
Pre-collision System
Intelligent Clearance Sonar System
Parking Assist Monitor System
Panoramic View Monitor System
Lighting System (w/ Automatic Headlight Beam Level Control System)
AFS (Adaptive Front-lighting System)
Power Door Lock Control System
Power Back Door System

WHEN USING TECHSTREAM
WARNING:
Observe the following items for safety reasons:
- Before using the Techstream, read the instruction information.
- Prevent the Techstream cable from being caught on the pedals, shift lever or steering wheel when driving with the Techstream connected to the vehicle.
- When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One drives the vehicle, and the other operates the Techstream.