Engine Oil Replacement Reminder Reset - Procedure 14

To reset MAINT reminder light after engine oil change:

1. Turn the ignition (or Power) switch (IG) ON.
2. Use the ODO/TRIP button (located left of the steering wheel) to change the screen display to TRIP A.
3. Turn the ignition (or Power) switch OFF.
4. Turn the ignition (or Power) switch ON (IG) while pressing and holding the ODO/TRIP button.
   NOTE: If the hybrid system is started the reset mode will be canceled
5. Hold the ODO/TRIP button for 5 seconds until the following conditions are met:
   • The TRIP A meter shows "000000".
   • The master warning light illuminates.
6. When "000000" disappears and the master warning light turns off, the resetting procedure is complete.