Typical Enabling Conditions
P2765
| The monitor will run whenever the following DTCs are not present | None |
| Battery voltage | 8 V or more |
| Engine switch | On (IG) |
| Starter | OFF |
| Input speed sensor verify pulse input | Normal (No malfunction) |
P2767
| The monitor will run whenever the following DTCs are not present | P0746, P0748 (Shift solenoid valve SL1 circuit) P0776, P0778 (Shift solenoid valve SL2 circuit) P0796, P0798 (Shift solenoid valve SL3 circuit) P2808, P2810 (Shift solenoid valve SL4 circuit) P2817, P2819 (Shift solenoid valve SL5 circuit) |
| Battery voltage | 8 V or more |
| Engine switch | On (IG) |
| Starter | OFF |
| Output shaft revolution | 1000 rpm or more (3rd, 4th, 5th or 6th) 1400 rpm or more (7th) |
| Park/neutral position switch assembly | OFF |
| R position switch | OFF |
| Engine | Running |
| Transmission range switch circuit | Normal (No malfunction) |
| Input speed sensor range check | Normal (No malfunction) |