LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> RC 350 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2GR-FKS) - Service Information >> Crankshaft Position Sensor >> Removal [11/2017 - ] >> Procedure

Removal [11/2017 - ]: Procedure

  1. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
      GTY804260Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and crankshaft position sensor from the cylinder block sub-assembly.
scientia non olet · About LEMON Manuals