Removal [11/2017 - ]: Procedure

1. Disengage the 2 claws and slide the rain sensor cover as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Release the stopper by pulling it out and disconnect the rain sensor as indicated by the arrows, in the order shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Stopper

3. Disengage the 2 claws to remove the rain sensor cover as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disconnect the connector to remove the rain sensor.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT: 

• The rain sensor tape is reusable. Only replace the tape if it is damaged or contaminated with foreign matter.
• Check that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue before installing the rain sensor.
• If there is any rain sensor tape residue remaining on the windshield glass, replace the tape.