LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> NX 300h Base >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column (Service Information) >> Tilt And Telescopic Manual Switch >> Installation [05/2019 - ] >> Procedure

Installation [05/2019 - ]: Procedure

  1. INSTALL TILT AND TELESCOPIC SWITCH 
    1. Attach the claw to install the tilt and telescopic switch.
    2. Connect the connector.
  2. INSTALL LOWER STEERING COLUMN COVER 
    1. Attach the 2 claws to install the lower steering column cover.
      NOTE:

      Do not damage the tilt and telescopic switch.

    2. Install the 3 screws.
  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
  4. INITIALIZATION AFTER RECONECTING AUXILIARY BATTERY TERMINAL 

    Refer to WORK PROCEDURE [05/2019 - ]

    HINT: 

    When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

    Refer to AUTOMATIC LEARNING CHART [05/2019 - ]

  5. INSTALL DECK FLOOR BOX LH 

    Refer to PROCEDURE - Step 6

  6. INSTALL REAR DECK FLOOR BOX 

    Refer to PROCEDURE - Step 7

  7. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 8

  8. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM 
    1. Reset the auto tilt away function setting to the previous condition by changing the customize parameter.

      Refer to CUSTOMIZE PARAMETERS [10/2014 - ]

scientia non olet · About LEMON Manuals