Customize Parameters [08/2016 - 08/2017]

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

CUSTOMIZING FUNCTION WITH TECHSTREAM

POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

TILT & TELESCOPIC

Display	Default	Content	Setting	Relevant ECU
Autoaway/Return function	ON	Turn the auto away/return function ON or OFF	ON/OFF	Multiplex tilt and telescopic ECU

HEATED STEERING WHEEL SYSTEM

AIR CONDITIONER

Display	Default	Contents	Setting
Steering Heater Sensitivity Adjust	0	Adjusts the operating time of the steering heater when the engine switch is turned on (IG).	+2 / +1 / 0 / -1 / -2
Steering Heater Auto Function	ON	Automatic operation of the steering heater when the engine switch is turned on (IG) can be set on or off.	ON / OFF

INTUITIVE PARKING ASSIST SYSTEM

WARNING

Display	Default	Contents	Setting	Relevant ECU
Fr Sensor Onset Range	Wide	Sets the buzzer activation range for the front sensors.	Narrow or Wide	Clearance Warning ECU Assembly
Rr Sensor Onset Range	Wide	Sets the buzzer activation range for the rear sensors.	Narrow or Wide	Clearance Warning ECU Assembly
Keep Sense Buzzer	Avail	Makes the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds.	Not Avail or Avail	Clearance Warning ECU Assembly
Fr & Rr Buzzer Volume	H	Changes the buzzer volume setting.	L, M1, M2, M3 or H	Clearance Warning ECU Assembly
Temporary Mute Reset Speed Adjust	20 km/h	Sets the vehicle speed at which the temporary mute function resets.	System Link, 15km/h, 20km/h, 30km/h	Clearance Warning ECU Assembly
Temporary Mute Function	ON	Sets the availability of the temporary mute function.	OFF, ON	Clearance Warning ECU Assembly

SENSOR

Display	Default	Contents	Setting	Relevant ECU
Sensor Condition N	Avail	Makes the sensors available when the shift lever is in N.	Not Avail or Avail	Clearance Warning ECU Assembly
Reverse Range Front Sensor	F	Changes the operation setting for the vehicle front sensors when the shift lever is in R.	F, Fcrn or F Stop	Clearance Warning ECU Assembly
Non P/R Range Rear Sensor	R Stop	Changes the operation setting for the vehicle rear sensors when the shift lever is not in P or R.	R, Rcrn or R Stop	Clearance Warning ECU Assembly

DISPLAY

Display	Default	Contents	Setting	Relevant ECU
Display Mode	All	The display mode setting (when the intuitive parking assist system is normal).	All or Undisp	Clearance Warning ECU Assembly

BLIND SPOT MONITOR SYSTEM

WARNING

Display	Default	Content	Setting	Relevant ECU
BSM Buzzer Volume Adjust	Medium	Function to adjust the buzzer volume of blind spot monitor buzzer.	Low, Medium or High	Blind Spot Monitor Sensor LH
BSM Mirror Indicator Brightness	Bright	This item sets brightness level of outer rear view mirror indicator.	Bright or Dark	Blind Spot Monitor Sensor LH
RCTA Function	ON	Switches the RCTA function on and off.	ON or OFF	Blind Spot Monitor Sensor LH
BSM Approaching Vehicle Detection Timing Setting	Middle	Sets the notification timing for vehicles approaching from behind the vehicle.	Only Blind Spot, Late, Middle or Early	Blind Spot Monitor Sensor LH

POWER DOOR LOCK CONTROL SYSTEM

DOOR LOCK

Display	Default	Contents	Setting
Unlock Key Twice	ON	Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.	ON/OFF
Automatic Door Lock Function	Link Shift	Link Shift: Function that locks all doors when the shift lever is moved out of P, with the engine switch on (IG) and all doors closed. Link Speed: Function that locks all doors when the vehicle speed reaches a certain level.	OFF/Link Shift/Link Speed
Automatic Door Unlock Function	Link Shift	Link D-door: Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the engine switch being turned off. Link Shift: Function that unlocks all doors when the shift lever is moved to P from any position other than P with the engine switch on (IG).	OFF/Link D-door/Link Shift

WIRELESS DOOR LOCK CONTROL SYSTEM

WIRELESS DOOR LOCK

Display	Default	Contents	Setting
Hazard Answer Back	ON	When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice.	ON/OFF
Wireless Control	ON	Function that turns the wireless door lock function on or off.	ON/OFF
Open Door Warning	ON	If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds.	ON/OFF
Panic Function	ON	Function to operate the theft deterrent system by continuously pressing the panic switch on transmitter for 1 second or more.	ON/OFF
Wireless Buzzer Resp	ON	Wireless door lock buzzer response.	ON/OFF
P/W Wireless Ope Buzz	ON	Wireless power window buzzer response.	ON/OFF
Unlock 2 Operation	ON	Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock.	ON / OFF
Auto Lock Time	60 s	Function to change the time until relocking after unlocking with the wireless door lock function.	OFF/30 s/60 s/120 s
Wireless Auto Lock	ON	Function to control the automatic relocking of doors after unlocking with the wireless door lock function.	ON/OFF
Wireless Buzzer Vol	Level 5	This function changes the wireless buzzer volume.	Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level 6/Level 7

PSD & PBD OPERATION

Display	Default	Contents	Setting
Wireless Power Back Door Open	Lock:0.8s/Unlock:0.8s	Function that operates the power back door by pushing the transmitter switch (electrical key transmitter sub-assembly).	Lock:OFF/Unlock:OFF, Lock:OFF/Unlock:ON, Lock:OFF/Unlock:Twice, Lock:OFF/Unlock:0.8s, Lock:Twice/Unlock:Twice or Lock:0.8s/Unlock:0.8

SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Entry Function)

WIRELESS DOOR LOCK

Display	Default	Content	Setting	Relevant ECU
Wireless Control	ON	Function that turns the wireless door lock control system on or off.	OFF or ON	Main body ECU (Multiplex network body ECU)
Hazard Answer Back	ON	When the doors are locked by the entry lock function, the hazard warning lights flash once. When the doors are unlocked by the entry lock function, the hazard warning lights flash twice.	OFF or ON	Main body ECU (Multiplex network body ECU)
Open Door Warning	ON	The buzzer sounds when the lock sensor on the door outside handle assembly is touched to perform entry lock with a door open.	OFF or ON	Main body ECU (Multiplex network body ECU)
Auto Lock Time	60 s	Function that regulates the interval between unlocking and automatic relocking of doors.	30 s, 60 s or 120 s	Main body ECU (Multiplex network body ECU)
Wireless Buzzer Resp	ON	Wireless buzzer response.	OFF or ON	Main body ECU (Multiplex network body ECU)
Wireless Buzzer Vol	Level5	Buzzer answer-back volume.	Level 7, Level 6, Level 5, Level 4, Level 3, Level 2, Level 1 or Level0	Main body ECU (Multiplex network body ECU)

WARNING

Display	Default	Content	Setting	Relevant ECU
Key Low Battery Warning	ON	Enables or disables the sounding of the buzzer when the transmitter battery is low and the engine switch is turned off after being on (IG) for 20 minutes or more.	OFF or ON	Certification ECU (Smart key ECU assembly)

SMART KEY / ACCESS

Display	Default	Content	Setting	Relevant ECU
Park Wait Time	2.5s	Function that sets the period of time (lock confirmation time) that the door is prevented from being unlocked by operating the front door outside handle assembly after an entry lock operation is performed.	0.5s, 1.5s, 2.5s or 5s	Certification ECU (Smart key ECU assembly)
Ignition Available Area	All	Function that sets the area that the key must be in before the engine switch can be operated.	Front or All	Certification ECU (Smart key ECU assembly)
Back Door Opening Operation	Long	Function that sets the back door when the user is carrying the electrical key transmitter sub-assembly and presses the back door opener switch assembly (open switch).	Long, Twice or OFF	Certification ECU (Smart key ECU assembly)
Door Unlock Mode2	Driver	Function that sets which doors are unlocked by the entry unlock function.	All or Driver	Certification ECU (Smart key ECU assembly)
Touch Activation Over Threshold	Active	The function that limits the consecutive entry lock operation to only 2 times can be changed between Active and Not Active. When in Not Active mode, there is no limit for the number of times that the consecutive entry lock operation can be performed.	Active or Not Active	Certification ECU (Smart key ECU assembly)
Engine Start Indicator	ON	Function that turns the entry warning light on the combination meter assembly on or off.	OFF or ON	Certification ECU (Smart key ECU assembly)

Entry unlock mode switching function (manual operation)

The following entry unlock modes can be selected when using the entry unlock mode switching function.
- All door unlock mode: When the sensor of a front door outside handle assembly is touched, an entry unlock operation is performed simultaneously for all doors.
- Driver door unlock mode: When the sensor of the driver side door outside handle assembly is touched, an entry unlock operation is performed for the driver door only. If any other door handle is touched, an entry unlock operation is performed simultaneously for all doors.

When customizing through manual operation:

Turn the engine switch off.
Check that the LED of the electrical key transmitter sub-assembly is not illuminated, and then press and hold the lock and unlock switches of the electrical key transmitter sub-assembly for 5 seconds or more while the electrical key transmitter sub-assembly is in the actuation area.

Check the current setting.

HINT:

The mode changes from all door unlock mode to driver door unlock mode and then back to all door unlock mode.

The answer-back (wireless buzzer, buzzer in the combination meter assembly) operation for each mode is indicated in the table below.

Currently Selected Mode	Answer-back (Wireless Buzzer)	Answer-back (Buzzer in Combination Meter Assembly)
All door unlock mode	Buzzer sounds twice (short beeps)	Buzzer sounds once
Driver door unlock mode	Buzzer sounds 3 times (short beeps)	Buzzer sounds once

Release the lock and unlock switches of the electrical key transmitter sub-assembly.
Check that the LED of the electrical key transmitter sub-assembly is not illuminated, and then press and hold the lock and unlock switches of the electrical key transmitter sub-assembly for 5 seconds or more to change the mode.
HINT:

Repeat the procedure as necessary to select the desired mode.
Unlock the doors with the wireless operation, and then open any door.

Fig 1: Wireless Door Lock Buzzer Diagram
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Entry cancel function (manual operation)
HINT:

While the smart access system with push-button start is canceled, it is possible to lock and unlock the doors with the wireless operation, and the start system can be operated by holding the electrical key transmitter sub-assembly near the engine switch.
1. The following functions are disabled when the smart access system with push-button start is canceled.
  1. Entry unlock/lock functions
  2. Push-button start function
  3. Key lock-in prevention function
  4. Entry warning functions
2. When canceling the smart access system with push-button start through manual operation:
  1. Make sure the following conditions are met:
    - The engine switch is off.
    - The driver door is closed.
    - The driver door is unlocked.
3. Press the unlock switch of the electrical key transmitter sub-assembly.
4. Open the driver door within 5 seconds of completing the step above (driver door: closed → opened).
5. With the driver door open, press the unlock switch of the electrical key transmitter sub-assembly 2 times within 5 seconds of completing the step above.
  NOTE:
  If the driver door is closed before or while pressing the unlock switch, the entry cancel setting mode will end.
6. Perform the following procedure within 30 seconds of completing the step above.
  1. Close and open the driver door twice (driver door: open → closed → opened → closed → opened).
  2. With the driver door open, press the unlock switch of the electrical key transmitter sub-assembly 2 times.
    NOTE:
    If the driver door is closed before or while pressing the unlock switch, the entry cancel setting mode will end.
  3. Close and open the driver door (driver door: open → closed → opened).
7. Close the driver door within 5 seconds (driver door: open → closed).
8. Check that the wireless buzzer sounds twice (short beeps) to confirm that the smart access system with push-button start has been canceled.
9. Perform the following procedure to restore the smart access system with push-button start to the active state from the canceled state.
  1. Perform the procedure to cancel the smart access system with push-button start again.
  2. Check that the wireless buzzer sounds once (short beep) to confirm that the smart access system with push-button start has been restored to the active state.
    HINT:
    - The system changes between the canceled state and the active state each time the procedure to cancel the system through manual operation is performed.
    - The buzzer sounds twice when the system changes from the active state to the canceled state, and sounds once when the system changes from the canceled state to the active state.

SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function)

SMART KEY/ACCESS

Display	Default	Content	Setting	Relevant ECU
Ignition Available Area	All	Function that sets the area that the key must be in before the engine switch can be operated.	Front or All	Certification ECU (smart key ECU assembly)
Engine Start Indicator	ON	Function that turns the key warning light on the combination meter assembly on or off.	OFF or ON	Certification ECU (smart key ECU assembly)

WARNING

Display	Default	Content	Setting	Relevant ECU
Key Low Battery Warning	ON	Enables or disables the sounding of the buzzer when the transmitter battery is low and the engine switch is turned off after being on (IG) for 20 minutes or more.	OFF or ON	Certification ECU (smart key ECU assembly)

THEFT DETERRENT SYSTEM

SECURITY

Display	Default	Content	Setting	Relevant ECU
Intrusion Win Opened	OFF	This function is used to enable or disable the window open warning*1.	OFF/ON	Main Body ECU (Multiplex Network Body ECU)
Window Open Warning	ON	This function is used to enable or disable the window open warning.	OFF/ON
Slide Roof Open Warning	ON	This function is used to enable or disable the sliding roof open warning*2.	OFF/ON

*1: Although the item is displayed on the Techstream, it is not applicable to this vehicle.
*2: w/ Sliding Roof System

WIRELESS DOOR LOCK

Display	Default	Content	Setting	Relevant ECU
Panic Function	ON	This function operates the theft deterrent system by continuously pressing the panic switch on the electrical key transmitter sub-assembly for 0.8 seconds.	OFF/ON	Main Body ECU (Multiplex Network Body ECU)

LIGHTING SYSTEM (INT)

ILLUMINATED ENTRY

Display	Default	Contents	Setting	ECU
Lighting Time	15 sec.	To change the lighting time after closing the door (it will quickly fade out in the case of turning the engine switch on (IG)).	15 sec., 7.5 sec. or 30 sec.	Main body ECU (Multiplex network body ECU)
I/L when ACC OFF	ON	Function to light the interior light when the engine switch is turned from on (IG) to off.	ON/OFF	Main body ECU (Multiplex network body ECU)
I/L ON W/Door Key Unlock	ON	Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch.	ON/OFF	Main body ECU (Multiplex network body ECU)
Room Light when Aprchd	ON	Dome light illumination (when approaching vehicle).	ON/OFF	Main body ECU (Multiplex network body ECU)
Inside Foot Light	ON	Interior foot light illumination.	ON/OFF	Main body ECU (Multiplex network body ECU)
Center Console Spot Light	ON	Center console spot light.	ON/OFF	Main body ECU (Multiplex network body ECU)
Mirr-Foot-Lgt Approached/Exterior Light Approached	ON	Function that turns on the door outside handle assembly (outside foot lights) when the vehicle is approached while carrying the key.	ON/OFF	Main body ECU (Multiplex network body ECU)
Mirr-Foot-Lgt Unlocked/Exterior Light Unlocked	ON	Function that turns on the door outside handle assembly (outside foot lights) when a door is unlocked with the electrical key transmitter or door lock switch of a door.	ON/OFF	Main body ECU (Multiplex network body ECU)
Light Control	ON	This function controls the lights.	ON/OFF	Main body ECU (Multiplex network body ECU)
Interior Light Control	ON	This function controls the interior lights.	ON/OFF	Main body ECU (Multiplex network body ECU)
Scuff plate Lamp linked to Door open	ON	This function controls the scuff plate illumination lights.	ON/OFF	Main body ECU (Multiplex network body ECU)
Interior Illumination Light	ON	This function controls the interior illumination (door illumination) lights.	ON/OFF	Main body ECU (Multiplex network body ECU)

METER / GAUGE SYSTEM

WARNING

Display	Default	Contents	Setting
Driver Side Seatbelt Warning Buzzer	ON	Function to turn on/off the seat belt warning buzzer	ON/OFF
Front Passenger Side Seatbelt Warning Buzzer	ON	Function to turn on/off the seat belt warning buzzer	ON/OFF
Flasher Sound Volume Adjustment	Medium	Function to change the flasher sound volume	Large, Medium or Small
Lane Change Flashing Times Setting	3	Function to change the lane change flashing time	OFF, 3, 4, 5, 6 or 7

DISPLAY

Display	Default	Contents	Setting
ODO Display Time After IG OFF Setting	30s	Function to change the ODO display time after the engine switch is turned off	30s, 60s, 600s, OFF

HEADS UP DISPLAY SYSTEM

DISPLAY

Display (Item)	Default	Contents	Setting
Projection Adjustment (Tilt)	$08: Default	Setting to change the tilt of the screen	$40: Clockwise (Hi), $20: Clockwise (Mid), $10: Clockwise (Lo), $08: Default, $04: Anti-Clockwise (Lo), $02: Anti-Clockwise (Mid), $01: Anti-Clockwise (Hi)
Master Caution Display Function	$01: ON	Setting to turn the master warning indicator on and off	$00: OFF, $01: ON
Speed Limit Display Function	$01: ON	Setting to turn the speed limit information display on and off	$00: OFF, $01: ON

PRE-COLLISION SYSTEM

OTHERS

Tester Display	Description	Default	Setting	ECU
PCS Operation State Retention Setting	operation state retention setting on/off	OFF	0:OFF, 1:ON	Driving support ECU assembly
PCS Alarm Activation Distance Retention Setting 1	Selects the PCS alarm activation distance retention setting 1	OFF	0:OFF, 1:ON	Driving support ECU assembly
PCS Alarm Activation Distance Retention Setting 2	Selects the PCS alarm activation distance retention setting 2	ON	0:OFF, 1:ON	Driving support ECU assembly
PCS Alarm Activation Distance Retention Setting 3	Selects the PCS alarm activation distance retention setting 3	OFF	0:OFF, 1:ON	Driving support ECU assembly

FRONT POWER SEAT CONTROL SYSTEM

SEAT

Display	Default	Contents	Setting
Seat Travel Distance	Normal	Allows customizing of the seat movement distance for the power easy access system.	OFF / short / Normal

SEAT HEATER SYSTEM

SEAT

Display	Default	Content	Setting	Relevant ECU
FL Seat A/C and Heater Sensitivity Adjust	0	When in AUTO, this function automatically adjusts the temperature of the seat heater	-2/-1/0/+1/+2	Air conditioning amplifier assembly
FR Seat A/C and Heater Sensitivity Adjust	0	When in AUTO, this function automatically adjusts the temperature of the seat heater	-2/-1/0/+1/+2	Air conditioning amplifier assembly

SEAT BELT WARNING SYSTEM

SEAT BELT WARNING

Display	Default	Contents	Setting
Driver Side Seatbelt Warning Buzzer	ON	If the driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sounds the seat belt warning buzzer.	ON/OFF
Front Passenger Side Seatbelt Warning Buzzer	ON	If the front passenger side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sounds the seat belt warning buzzer.	ON/OFF

AIR CONDITIONING SYSTEM

AIR CONDITIONER

Display	Default	Contents	Setting	Relevant ECU
Set Temperature Shift	Normal	Function to set the temperature shift.	+2 C/+1 C/Normal/-1 C/-2 C	Air conditioning amplifier assembly
Compressor Mode	Automatic	Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C switch is off.	Manual/Automatic	Air conditioning amplifier assembly
Air Inlet Mode	Automatic	Function to change the mode automatically to RECIRCULATION mode in cases when the air conditioning is turned on to cool the cabin down quickly	Manual/Automatic	Air conditioning amplifier assembly
Foot/DEF Auto Mode	ON	Function to turn the airflow from FOOT/DEF on automatically when auto mode is on.	ON/OFF	Air conditioning amplifier assembly
Foot/DEF Automatic Blow Up Function	ON	Function to change the blower level automatically when the defroster is on.	ON/OFF	Air conditioning amplifier assembly
Ambient Temperature Shift	Normal	Function to control the shifted ambient temperature in relation to the displayed ambient temperature.	+3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C	Air conditioning amplifier assembly
Emission Gas Sensor Shift	Normal	Function to change the sensitivity of the exhaust gas sensor.	Much Less/Less/Little Less/normal/Little More/More/Much More	Air conditioning amplifier assembly
Add Foot Air in FACE Mode	ON	When the FACE mode is selected, an additional amount of air blow to the foot area. Selecting OFF will cancel this additional air flow.	ON/OFF	Air conditioning amplifier assembly
ECO MODE Cancel	OFF	Function to cancel the ECO mode drive when item is on	ON/OFF	Air conditioning amplifier assembly
Refrigerant Shortage Check	ON	Function to cancel the refrigerant gas volume check (check performed during normal operation) when item is set to OFF	ON/OFF	Air conditioning amplifier assembly
Fan speed increment control	Normal	Function to define how fast the air conditioning blower goes to target speed when first activating the air conditioning	Slow/Normal/Fast	Air conditioning amplifier assembly

POWER WINDOW CONTROL SYSTEM

POWER WINDOW

Display	Default	Content	Setting	Relevant ECU
Door Key P/W Up	OFF	This function is used to close the windows by operating the mechanical key.	OFF or ON	Main body ECU (Multiplex network body ECU)
Door Key P/W Down	OFF	This function is used to open the windows by operating the mechanical key.	OFF or ON	Main body ECU (Multiplex network body ECU)
P/W Up W/ Transmit	OFF	This function is used to close the windows using the electrical key transmitter subassembly.	OFF or ON	Main body ECU (Multiplex network body ECU)
P/W Down W/ Transmit	OFF	This function is used to open the windows using the electrical key transmitter subassembly.	OFF or ON	Main body ECU (Multiplex network body ECU)
D Window Auto Up	ON	This function is used to enable or disable the auto up function for the driver door window using the multiplex network master switch assembly.	OFF or ON	Front power window regulator motor assembly LH
P Window Auto Up	ON	This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly.	OFF or ON	Front power window regulator motor assembly RH
RR Window Auto Up	ON	This function is used to enable or disable the auto up function using the rear power window regulator switch assembly LH.	OFF or ON	Rear power window regulator motor assembly RH
RL Window Auto Up	ON	This function is used to enable or disable the auto up function using the rear power window regulator switch assembly RH.	OFF or ON	Rear power window regulator motor assembly LH
P Window Auto Up From Driver	ON	This function is used to enable or disable the remote auto up function for the front passenger door window using the multiplex network master switch assembly.	OFF or ON	Front power window regulator motor assembly RH
RR Window Auto Up From Driver	ON	This function is used to enable or disable the remote auto up function for the rear door RH window using the multiplex network master switch assembly.	OFF or ON	Rear power window regulator motor assembly RH
RL Window Auto Up From Driver	ON	This function is used to enable or disable the remote auto up function for the rear door LH window using the multiplex network master switch assembly.	OFF or ON	Rear power window regulator motor assembly LH
D Window Auto Down	ON	This function is used to enable or disable the auto down function for the driver door window using the multiplex network master switch assembly.	OFF or ON	Front power window regulator motor assembly LH
P Window Auto Down	ON	This function is used to enable or disable the auto down function for the front passenger door window using the power window regulator switch assembly.	OFF or ON	Front power window regulator motor assembly RH
RR Window Auto Down	ON	This function is used to enable or disable the auto down function using the rear power window regulator switch assembly RH.	OFF or ON	Rear power window regulator motor assembly RH
RL Window Auto Down	ON	This function is used to enable or disable the auto down function using the rear power window regulator switch assembly LH.	OFF or ON	Rear power window regulator motor assembly LH
P Window Auto Down From Driver	ON	This function is used to enable or disable the remote auto down function for the front passenger door window using the multiplex network master switch assembly.	OFF or ON	Front power window regulator motor assembly RH
RR Window Auto Down From Driver	ON	This function is used to enable or disable the remote auto up function for the rear door RH window using the multiplex network master switch assembly.	OFF or ON	Rear power window regulator motor assembly RH
RL Window Auto Down From Driver	ON	This function is used to enable or disable the remote auto down function for the rear door LH window using the multiplex network master switch assembly.	OFF or ON	Rear power window regulator motor assembly LH

WIRELESS DOOR LOCK

Display	Default	Content	Setting	Relevant ECU
P/W Wireless Open Buzz	ON	This function turns the wireless power window buzzer response on or off.	OFF or ON	Main body ECU (Multiplex network body ECU)

SECURITY

Display	Default	Content	Setting	Relevant ECU
Window Open Warning	ON	This function is used to enable or disable the window open warning.	OFF or ON	Main body ECU (Multiplex network body ECU)

SLIDING ROOF SYSTEM

SLIDE ROOF

Display	Default	Contents	Setting
Door Key Related Open	ON	The function to manually open the sliding roof linked with the power window if holding the driver side door key for 3 seconds or more to unlock position when the engine switch is off.	ON/OFF
Door Key Related Close	ON	The function to manually close the sliding roof linked with the power window if holding the driver side door key for 3 seconds or more to lock position when the engine switch is off.	ON/OFF
Wireless Key Related Open	OFF	The function to manually open the sliding roof linked with the power window if pressing the transmitter unlock switch for 3 seconds or more when the engine switch is off.	ON/OFF
Door Handle Lock Button	ON	The function to manually close the sliding roof linked with the power window if pushing the door lock switch for 3 seconds or more when the engine switch is off and the key is outside vehicle.	ON/OFF
Door Key Related Operation	Slide	The function to select tilt up or slide open of manual sliding roof operation linked with the power window activated by holding the driver side door key for 3 seconds or more to unlock position when the engine switch is off.	Tilt/Slide
Wireless Key Related Operation	Slide	The function to select tilt up or slide open of manual sliding roof operation linked with the power window activated by pressing on the transmitter unlock switch for 3 seconds or more when the engine switch is off.	Tilt/Slide

POWER BACK DOOR SYSTEM

PSD & PBD OPERATION

Display	Default	Contents	Setting
PBD SW Operation	0.8 s	Function that turns power back door closer switch on when switch is pushed once or held down for 0.8 seconds.	0.8s or ON
PBD Buzzer	ON	Function that makes the power back door buzzer sound when power back door is operating	ON or OFF
Door Unlock with 1 Motion	ALL DOORS	Function that selects the door or doors to unlock when the back door is locked and the transmitter switch (electrical key transmitter sub-assembly) is pushed to operate the power back door.	Back Door or ALL DOORS
Wireless Power Back Door Open	Lock:0.8s/Unlock:0.8s	Function that operates the power back door by pushing the transmitter switch (electrical key transmitter sub-assembly).	Lock:OFF/Unlock:OFF, Lock:OFF/Unlock:ON, Lock:OFF/Unlock:Twice, Lock:OFF/Unlock:0.8s, Lock:Twice/Unlock:Twice or Lock:0.8s/Unlock:0.8

POWER MIRROR CONTROL SYSTEM

OTHERS

Display	Default	Contents	Setting	Relevant ECU
Reverse Coupled Actuation Mirror Angle	User Setting	Function that turns the reverse shift-linked mirror position memorization function on or off	Default Setting / User Setting	Main body ECU (multiplex network body ECU)

LIGHTING SYSTEM (EXT)

LIGHT CONTROL

Display	Default	Content	Setting	Relevant ECU
Disp Ex ON Sen	NORMAL	Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A	LIGHT2/LIGHT1/NORMAL/DARK1/DARK2	Main Body ECU (Multiplex Network Body ECU)
Disp Ex OFF Sen	NORMAL	Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B	LIGHT2/LIGHT1/NORMAL/DARK1/DARK2	Main Body ECU (Multiplex Network Body ECU)
Sensitivity	Normal	Adjusts the sensitivity of the automatic light control system.*C	LIGHT2/LIGHT1/NORMAL/DARK1/DARK2	Main Body ECU (Multiplex Network Body ECU)
DRL Function	ON	Turns the DRL function on/off.*	ON/OFF	Main Body ECU (Multiplex Network Body ECU)
Light up Clearance Lights at Door Unlock Function	ON	Turns on the clearance lights and the taillights for 15 seconds when the doors are unlocked by the smart key or the wireless key.	ON/OFF	Main Body ECU (Multiplex Network Body ECU)

WARNING

Display	Default	Content	Setting	Relevant ECU
Lane Change Flashing Times Setting	3	Function to change the number of flashes for the lane change flasher	OFF/3/4/5/6/7	Combination meter assembly

*: Vehicles displaying the Item "DRL Function" on the Techstream

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

Fig 2: Brightness Level Required To Dim The Lights

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Brightness Level Required To Cancel The Dimming The Lights

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 4: Sensitivity Of The Automatic Light Control System

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Turn the engine switch on (IG).
Enter the following menus: Setup / Vehicle.
Select the setting by referring to the table below.

AUDIO AND VISUAL SYSTEM

Display	Default	Content	Setting	Relevant ECU
Feedback Force	0 (middle bar)	Feedback force setting of the remote touch*	-2, -1, 0, +1 or +2	Multi-media module receiver assembly
Feedback Force	0 (middle bar)	Feedback force setting of the remote touch*	NO FEEDBACK FORCE/ LEVEL1/LEVEL2/ LEVEL3/LEVEL4	Multi-media module receiver assembly

HINT:

*: The higher the set value, the stronger the remote touch feedback force becomes.

NAVIGATION SYSTEM

Display	Default	Content	Setting	Relevant ECU
Feedback Force	3 (middle bar)	Feedback force setting of the remote touch*	1, 2, 3, 4 or 5	Multi-media module receiver assembly
Feedback Force	3 (middle bar)	Feedback force setting of the remote touch*	LEVEL1/LEVEL2/ LEVEL3/LEVEL4/LEVEL5	Multi-media module receiver assembly

HINT:

*: The higher the set value, the stronger the remote touch feedback force becomes.

HEATED STEERING WHEEL SYSTEM

Display	Default	Contents	Setting
Auto heated steering wheel	On	Automatic ON setting	On / Off
Str wheel auto heating duration	Center(Level3)	Adjustment of the length of the OFF timer when automatic is set to ON	Level 1 Level 2 Level 3 Level 4 Level5

INTUITIVE PARKING ASSIST SYSTEM

Display	Default	Contents	Setting
Alert volume	3	Sets the buzzer activation range for the rear center sensors.	1, 2, 3, 4 or 5
Display	Indicator of Display Off not illuminated5 or indicator of Display Off illuminated6	The display mode setting (when the intuitive parking assist system is normal).	On or Off
Distance Front	Green*2	Sets the detection operation range for the front center sensors.	Orange1 or Green2
Distance Rear	Green*2	Sets the detection operation range for the rear center sensors.	Orange3 or Green4

*1: Detection range of 600 mm (23.6 in.)
*2: Detection range of 1000 mm (39.4 in.)
*3: Detection range of 800 mm (31.5 in.)
*4: Detection range of 1500 mm (59.1 in.)
*5: Sonar indication is available on the multi-display
*6: Sonar indication is not available on the multi-display

BLIND SPOT MONITOR SYSTEM

WARNING

Display	Default	Content	Setting	Relevant ECU
Outside Rear View Mirror Indicator Brightness	Dim	This item sets brightness level of outer rear view mirror indicator.	Dim or Bright	Blind Spot Monitor Sensor LH
Rear cross traffic alert volume	3	Function to adjust the buzzer volume of blind spot monitor buzzer.	3, 2 or 1	Blind Spot Monitor Sensor LH
BSM Approaching Vehicle Detection Timing Setting	Middle	Sets the notification timing for vehicles approaching from behind the vehicle.	Only Blind Spot, Late, Middle or Early	Blind Spot Monitor Sensor LH

POWER DOOR LOCK CONTROL SYSTEM

Display	Default	Content	Setting
Automatic Door Lock	By Shift From P	By Shift From P: Function that locks all doors when the shift lever is moved out of P, with the engine switch on (IG) and all doors closed. By Speed: Function that locks all doors when the vehicle speed reaches a certain level.	By Speed, By Shift From P or Off
Automatic Door Unlock	By Shift to P	By Driver Door: Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the engine switch being turned off. By Shift to P: Function that unlocks all doors when the shift lever is moved to P from any position other than P with the engine switch on (IG).	By Shift to P, By Driver Door or Off
Unlock on Second Key Turn	On	Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.	On or Off

WIRELESS DOOR LOCK CONTROL SYSTEM

Display	Default	Content	Setting
Remote 2-Press Unlock	On	Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock.	On or Off
Auto Relock Time Adjust	60 sec.	Function that regulates the interval between unlocking and automatic relocking of doors	30 sec., 60 sec. or 120 sec.
Lock/Unlock Answer Back	On	When the doors are locked by wireless operation, the hazard warning lights flash once. When the doors are unlocked by wireless operation, the hazard warning lights flash twice.	On or Off
Lock Feedback Volume	5 Bars	Wireless door lock buzzer volume	0, 1, 2, 3, 4, 5, 6 or 7 Bars

SMART KEY SYSTEM (for Entry Function)

Display	Default	Content	Setting	Relevant ECU
Select Doors to Unlock	Driver's Door	Function that sets which doors are unlocked by the entry unlock function.	All Doors or Driver's Door	Certification ECU (Smart key ECU assembly)
Auto Relock Timer	60 sec.	Function that turns the auto lock function on or off.	30 sec., 60 sec. or 120 sec.	Main body ECU (Multiplex network body ECU)
Lock/Unlock Feedback-Lights	On	When the doors are locked by the entry lock function, the hazard warning lights flash once. When the doors are unlocked by the entry lock function, the hazard warning lights flash twice.	On or Off	Main body ECU (Multiplex network body ECU)
Lock/Unlock Feedback-Tone	5	Buzzer answer-back volume.	Off, 1, 2, 3, 4, 5, 6 or 7	Main body ECU (Multiplex network body ECU)

LIGHTING (INT)

Display	Default	Contents	Setting	Relevant ECU
Interior Lights Off Time	15 sec.	This function controls the interior lights.	Off, 15 sec., 7.5 sec. or 30 sec.	Main body ECU (Multiplex network body ECU)

FRONT POWER SEAT CONTROL SYSTEM

Display	Default	Contents	Setting
Driver's seat easy exit	Partial	Allows customization of the seat movement distance for the power easy access system.	Full / Partial / Off

SEAT HEATER SYSTEM

CLIMATE SETTINGS

Display	Default	Contents	Setting	Relevant
Auto Seat Temp. FR L	0	When in AUTO, this function automatically adjusts the temperature of the seat heater	-2/-1/0/+1/+2	Air conditioning amplifier assembly
Auto Seat Temp. FR R	0	When in AUTO, this function automatically adjusts the temperature of the seat heater	-2/-1/0/+1/+2	Air conditioning amplifier assembly

AIR CONDITIONING SYSTEM

CLIMATE SETTINGS

Display	Default	Contents	Setting	Relevant ECU
Auto A/C Mode	On	Enables or disables the function which automatically turns the air conditioning on according to the state of the AUTO switch.	On or Off	Air conditioning amplifier assembly
Efficient Ventilation Mode	On	Enables or disables the function which automatically switches between recirculation and fresh air modes when the AUTO switch is on.	On or Off	Air conditioning amplifier assembly
Smog Sensor Sensitivity	0	Changes the sensitivity of the exhaust gas sensor.	-2, -1, 0, +1, +2	Air conditioning amplifier assembly

LIGHTING SYSTEM (EXT)

LIGHTS SETTINGS

Display	Default	Content	Setting	Relevant ECU
Headlamps-On Sensitivity	0	Adjusts the sensitivity of the automatic light control system.*A	-2, -1, 0, +1 or +2	Main Body ECU (Multiplex Network Body ECU)
Daytime running lights*	On	Turns the DRL function on/off.	On or Off	Main Body ECU (Multiplex Network Body ECU)
Exterior lights off timer	15 sec.	Changes the lighting time of the outside handle foot lights.	OFF, 7.5 sec., 15 sec. or 30 sec.	Main Body ECU (Multiplex Network Body ECU)

*: Vehicles displaying the Item "Daytime running lights" on the multi-information display.

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

Fig 5: Sensitivity Levels Of The Automatic Light Control System

CUSTOMIZING FUNCTION WITH MULTI-INFORMATION DISPLAY

Turn the engine switch on (IG).
Enter the following menus: Setup / Vehicle.
Select the setting by referring to the table below.

LANE DEPARTURE ALERT SYSTEM

Display	Default	Content	Setting	Relevant ECU
Warning Method	Buzzer	Method of lane departure warning	Buzzer/steering vibrator	Forward recognition camera
Sensitivity	Normal	Change LDA Sensitivity	Normal/High	Forward recognition camera
Sway Warning	On	Lane Sway Warning Status	On/Off	Forward recognition camera
Sway Sensitivity	Normal	Sway Warning Sensitivity	Low/Normal/High	Forward recognition camera

METER / GAUGE SYSTEM

SETTINGS

Combination Meter Assembly Display	Description	Default	Setting
Change Language	Function to change the language on the display	English	English, French or Spanish
Change Display Units	Function to change the units on the display	miles (MPG)1 or km (L/100 km)2	km (km/L), km (L/100 km), miles (MPG)
ECO Indicator On/Off	Function to turn on/off the ECO indicator	On	On, Off
Switch Settings	Function to change the screen assigned to the TOP button on the steering pad switch assembly	Drive Info 1	-
Change Interrupt Settings	Function to change the interrupt display setting a displayed item	ON	On, off
Choose Button Color	Function to change the cursor color when selecting a displayed item	White Heat	White Heat or Titanium Silver
Drive Info 1	Function to change the item to be displayed on Drive Info 1	Current Fuel Economy (Bar Type), Average Fuel Economy (After Reset)	Current Fuel Economy (Bar Type, Value Type), Average Fuel Economy (After Reset, After Start, After Refuel), Average Speed (After Reset, After Start), Elapsed Time (After Start), Distance (Range, After Start), Other (Blank)
Drive Info 2	Function to change the item to be displayed on Drive Info 2	Distance (Range), Average Speed (After Reset)	Current Fuel Economy (Bar Type, Value Type), Average Fuel Economy (After Reset, After Start, After Refuel), Average Speed (After Reset, After Start), Elapsed Time (After Start), Distance (Range, After Start), Other (Blank)
Do You Want to Return to Factory Settings?	Reset Settings to Defaults	-	-

*1: for miles unit
*2: for km unit