Headlight Dimmer Switch
HEADLIGHT DIMMER SWITCH
| Connector Condition | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| Component without harness connected | z35-2 (L_OFF) - z35-12 (EL) | Light control switch OFF | Below 1 Ω |
| z35-10 (A) - z35-12 (EL) | Light control switch AUTO position | ||
| z35-14 (T) - z35-12 (EL) | Light control switch TAIL position | ||
| z35-5 (H) - z35-12 (EL) | Light control switch HEAD position | ||
| z35-6 (HF) - z35-12 (EL) | Headlight dimmer switch flash position | ||
| z35-1 (HU) - z35-12 (EL) | Headlight dimmer switch high position | ||
| z35-9 (TR) - z35-12 (EL) | Turn signal switch neutral position | 10 kΩ or higher | |
| z35-3 (TL) - z35-12 (EL) | |||
| z35-9 (TR) - z35-12 (EL) | Turn signal switch right turn position (self cancel condition) |
Below 1 Ω | |
| z35-9 (TR) - z35-12 (EL) | Turn signal switch right turn position (cancel ratchet operation condition) |
||
| z35-9 (TR) - z35-4 (CR) | |||
| z35-4 (CR) - z35-12 (EL) | |||
| z35-3 (TL) - z35-12 (EL) | Turn signal switch left turn position (self cancel condition) |
||
| z35-3 (TL) - z35-12 (EL) | Turn signal switch in left turn position (cancel ratchet operation condition) |
||
| z35-3 (TL) - z35-4 (CR) | |||
| z35-4 (CR) - z35-12 (EL) | |||
| z35-16 (AHB) - z35-12 (EL) | AHB switch off | 10 kΩ or higher | |
| AHB switch on | Below 1 Ω |
HINT:
- The self cancel condition indicates when the turn signal switch returns to the neutral position after releasing your hand from the switch (switch is operated within 6.3°).
- The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even after releasing your hand (switch operation is 10.5°).