Inspection [12/2017 - ]: Procedure
- INSPECT HEIGHT CONTROL PRESSURE SENSOR
- Check the height control pressure sensor output voltage.
Standard Voltage
Tester Connection Condition Specified Condition L3-2 (PACC) - L3-3 (SHB) Apply 5 V between terminals 1 (SHG) and 3 (SHB). 0.5 to 4.5 V HINT:
- If a stable power supply is not available, connect 4 nickel-metal hydride batteries (1.2 V each) or equivalent in series.
- If the result is not as specified, replace the height control pressure sensor.
*a Component without harness connected
(Height Control Pressure Sensor)
- Check the height control pressure sensor output voltage.