LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LS 500 Base, AWD >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension Control System - Service Information >> Height Control Way >> Inspection [12/2017 - ] >> Procedure

Inspection [12/2017 - ]: Procedure

  1. INSPECT HEIGHT CONTROL WAY 
    1. Check the height control way output voltage.

      Standard Voltage

      Tester Connection Condition Specified Condition
      A42-2 (PAC2) -A42-3 (SHB) Apply 5 V between terminals 1 (SHG) and 3 (SHB). 0.5 to 4.5 V

      HINT: 

      • If a stable power supply is not available, connect 4 nickel-metal hydride batteries (1.2 V each) or equivalent in series.
      • If the result is not as specified, replace the height control way.
      GTY776495Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Height Control Way)
scientia non olet · About LEMON Manuals