LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LS 500 Base, AWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Dynamic Rear Steering System - Service Information >> Dynamic Rear Steering Actuator >> Reassembly [12/2017 - 10/2023] >> Procedure

Reassembly [12/2017 - 10/2023]: Procedure

  1. INSTALL REAR STEERING TIE ROD ASSEMBLY LH 
    1. Install the lock nut and tie rod assembly LH to the steering rack end sub-assembly until the matchmarks are aligned.

      HINT: 

      After adjusting toe-in, tighten the lock nut.

      GTY826832Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Matchmark
  2. INSTALL REAR STEERING TIE ROD ASSEMBLY RH 

    HINT: 

    Perform the same procedure as for the LH side.

scientia non olet · About LEMON Manuals