LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LS 500 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Advanced Driver Assistance System - Service Information >> Millimeter Wave Radar Sensor >> Reassembly [10/2020 - 11/2021] >> Procedure

Reassembly [10/2020 - 11/2021]: Procedure

  1. INSTALL NO. 1 MILLIMETER WAVE RADAR SENSOR BRACKET 
    1. Attach the guide.
      Fig 1: No. 1 Millimeter Wave Radar Sensor Bracket Bolts And Screw Tightening Sequence
      GTY819300Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Screw
      Bolt
    2. Temporarily install the No. 1 millimeter wave radar sensor bracket with the 2 bolts and screw.
    3. Tighten the 2 bolts and screw in the order shown in the illustration.

      Bolt 

      Torque: 2.5 N.m (25 kgf/cm, 22 in.lbf) 

scientia non olet · About LEMON Manuals