Installation [05/2023 - ]: Procedure
- INSTALL TILT AND TELESCOPIC SWITCH
- Engage the claw to install the tilt and telescopic switch.
- Connect the tilt and telescopic connector to the tilt and telescopic switch.
- Connect the airbag connector to the spiral cable with sensor sub-assembly.
HINT:
Refer to How to Connect or Disconnect Airbag Connector:
Refer to HOW TO CONNECT OR DISCONNECT AIRBAG CONNECTOR [05/2023 - ]
- INSTALL LOWER STEERING COLUMN COVER SUB-ASSEMBLY
- Insert the lower steering column cover sub-assembly in the direction indicated by the arrow.NOTE:
Do not damage the tilt and telescopic switch.
Install in this Direction - Engage the 4 claws to install the lower steering column cover sub-assembly to the upper steering column cover.
- Install the 3 screws.
- Insert the lower steering column cover sub-assembly in the direction indicated by the arrow.
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Refer to INSTALLATION [05/2023 - ]
- CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
- Reset the auto tilt away function setting to the previous condition by changing the customize parameter.
Refer to CUSTOMIZE PARAMETERS [07/2020 - ]
- Reset the auto tilt away function setting to the previous condition by changing the customize parameter.
- INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.