Problem Symptoms Table [05/2023 - ]
HINT:
- If the problem occurs in certain locations or times of day, the possibility of wave interference is high.
- If a malfunction occurred after optional components were installed by the dealer, check if there is wave interference from the components.
SMART ACCESS SYSTEM WITH PUSH-BUTTON START (FOR START FUNCTION)
| Symptom | Suspected Area | Link |
|---|---|---|
| Power source mode does not change to on (IG) or on (ACC) | Smart Access System with Push-Button Start (for Entry Function) | Refer to Power Source Mode does not Change to ON (IG and ACC) [07/2020 - ] |
| Affected by Wave Interference | ||
| Transmitter Battery | ||
| Electrical Key Transmitter Sub-assembly | ||
| No. 1 Indoor Electrical Key Antenna Assembly (Front Floor) | ||
| No. 2 Indoor Electrical Key Antenna Assembly (Rear Floor) | ||
| Engine Switch | ||
| Harness or Connector | ||
| Junction Block Assembly LH | ||
| Certification ECU (Smart Key ECU Assembly) | ||
| Power source mode does not change to on (IG) | Harness or Connector | Refer to Power Source Mode does not Change to ON (IG) [07/2020 - ] |
| Relay | ||
| Junction Block Assembly LH | ||
| Junction Block Assembly RH | ||
| Certification ECU (Smart Key ECU Assembly) | ||
| Power source mode does not change to on (ACC) | Harness or Connector | Refer to Power Source Mode does not Change to ON (ACC) [05/2023 - ] |
| Relay | ||
| Junction Block Assembly LH | ||
| Junction Block Assembly RH | ||
| Certification ECU (Smart Key ECU Assembly) | ||
| Engine does not start | SFI System | Refer to Engine does not Start [05/2023 - ] |
| Immobiliser Function | ||
| Harness or Connector | ||
| Shift Control ECU | ||
| Stop Light Switch Assembly | ||
| Certification ECU (Smart Key ECU Assembly) | ||
| New key cannot be registered | Lin Communication System | Refer to New Key cannot be Registered [05/2023 - ] |
| Meter / Gauge System | ||
| Reregistration | ||
| Electrical Key Transmitter Sub-assembly | ||
| ID Code Box (Immobiliser Code ECU) | ||
| Certification ECU (Smart Key ECU Assembly) | ||
| Additional key cannot be registered | Electrical Key Transmitter Sub-assembly | Refer to Additional Key cannot be Registered [05/2023 - ] |
| Certification ECU (Smart Key ECU Assembly) | ||
| New Key registration warning message is not displayed | Lighting System | Refer to New Key Registration Warning Message is not Displayed [07/2020 - ] |
| Meter / Gauge System | ||
| Certification ECU (Smart Key ECU Assembly) | ||
| "Key Battery Low Replace Key Battery" is displayed on the Multi-information display | Transmitter Battery | Refer to "Key Battery Low Replace Key Battery" is Displayed on the Multi-information Display [07/2020 - ] |
| Security indicator light does not blink | Harness or Connector | Refer to Security Indicator Light Does not Blink [07/2020 - ] |
| Security Indicator Light (Integration Control and Panel Assembly) | ||
| Main Body ECU (Multiplex Network Body ECU) | ||
| Certification ECU (Smart Key ECU Assembly) | ||
| Immobiliser system does not operate properly | SFI System | Refer to Immobiliser System does not Operate Properly [07/2020 - ] |
| Register ECU Communication ID | ||
| Harness or Connector | ||
| ID Code Box (Immobiliser Code ECU) | ||
| ECM |