DTC Check / Clear [08/2015 - 08/2019]

CHECK FOR DTC
1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Enter the following menus: Body Electrical / (desired system) / Trouble Code.
4. Check for DTCs.
  HINT:
  
  As the driving support ECU and seat belt control ECU output DTCs for the pre-collision system, be sure to check the DTCs for Pre-Collision and Pre-Collision 2.
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Enter the following menus: Body Electrical / (desired system) / Trouble Code.
4. Clear the DTCs.
  HINT:
  
  As the driving support ECU and seat belt control ECU output DTCs for the pre-collision system, be sure to check the DTCs Pre-Collision and Pre-Collision 2.