LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> GX 460 Base >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column (Service Information) >> Steering Heater Switch >> Installation [08/2019 - ] >> Procedure

Installation [08/2019 - ]: Procedure

  1. INSTALL STEERING HEATER SWITCH (INTEGRATION CONTROL AND PANEL ASSEMBLY) 
    1. Attach the 2 claws to install the switch.
  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 23 [08/2019 - 08/2021] , or refer to PROCEDURE - Step 25 [08/2021 - ]

  3. INSTALL NO. 2 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 29 [08/2019 - 08/2021] , or refer to PROCEDURE - Step 31 [08/2021 - ]

  4. INSTALL INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 30 [08/2019 - 08/2021] , or refer to PROCEDURE - Step 32 [08/2021 - ]

  5. INSTALL INSTRUMENT PANEL FINISH PANEL END LH 

    Refer to PROCEDURE - Step 7 [08/2019 - 08/2021] , or refer to PROCEDURE - Step 7 [08/2021 - ]

  6. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 12 [08/2019 - 08/2021] , or refer to PROCEDURE - Step 12 [08/2021 - ]

  7. INSTALL COWL SIDE TRIM BOARD LH 

    Refer to PROCEDURE - Step 62 [08/2019 - ]

  8. INSTALL DOOR SCUFF PLATE ASSEMBLY LH 

    Refer to PROCEDURE - Step 64

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [08/2019 - 08/2021] , or refer to INITIALIZATION [08/2021 - 08/2022] , or refer to INITIALIZATION [08/2022 - ]

scientia non olet · About LEMON Manuals