Installation [08/2015 - ]: Procedure

INSTALL FUEL PUMP ECU
1. Install the fuel pump ECU with the 2 bolts.
  Torque: 31 N*m (316 kgf*cm, 23 ft.*lbf)
  
  NOTE:
  Do not use the fuel pump ECU if it has been subjected to physical shocks, such as being dropped, etc.
2. Connect the 2 connectors.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [08/2015 - 08/2019] , or refer to INITIALIZATION [08/2019 - 08/2021] , or refer to INITIALIZATION [08/2021 - 08/2022] , or refer to INITIALIZATION [08/2022 - ] ).