How To Proceed With Troubleshooting [08/2015 - ]: Procedure

Result

Result: 

NEXT 

See step  2

1. Measure the battery voltage.

   Standard Voltage

   11 to 14 V

   HINT: 

   • A simple method to determine whether the battery is discharged is to operate the horn.
   • If the voltage is below 11 V, recharge or replace the battery before proceeding.
2. Check for blown fuses, open or shorted wire harnesses, improperly connected connectors and other problems in areas that can be visually inspected.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Refer to the Problem Symptoms Table.

   Refer to PROBLEM SYMPTOMS TABLE [08/2015 - 08/2019] , or refer to PROBLEM SYMPTOMS TABLE [08/2019 - ] 

   Result

   Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed in problem symptoms table	B

Result: 

B 

ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE 

Result: 

A 

See step  4

1. Terminals of ECU.

   Refer to TERMINALS OF ECU [08/2015 - 08/2019] , or refer to TERMINALS OF ECU [08/2019 - ] 

2. Data List / Active Test.

   Refer to DATA LIST / ACTIVE TEST [08/2015 - 08/2019] , or refer to DATA LIST / ACTIVE TEST [08/2019 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  5

Result

Result: 

NEXT 

See step  6

Result

Result: 

NEXT 

END