LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> GX 460 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System (Service Information) >> Wiper Switch >> Installation [08/2015 - 08/2019] >> Procedure

Installation [08/2015 - 08/2019]: Procedure

  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY 
    1. Attach the claw to install the windshield wiper switch assembly.
    2. Connect the connector.
  2. INSTALL UPPER STEERING COLUMN COVER 
    1. w/o Driver Monitor Camera:
      1. Attach the 4 clips and claw to install the upper steering column upper cover to the instrument cluster finish panel.
    2. w/ Driver Monitor Camera:
      1. Connect the connector.
      2. Attach the 4 clips and claw to install the upper steering column upper cover to the instrument cluster finish panel.
  3. INSTALL LOWER STEERING COLUMN COVER 
    1. Attach the 2 claws to install the lower steering cover.
    2. Install the screw.
    3. Turn the steering wheel to the right and left as necessary to install the 2 screws.
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [08/2015 - 08/2019] ).

scientia non olet · About LEMON Manuals