LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> GX 460 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Smart Access System (Entry Function) (Diagnostic Codes & Symptom Tests) >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Entry Function) >> Entry Exterior Alarm and Answer-back Buzzer do not Sound [08/2019 - ] >> Procedure

Entry Exterior Alarm and Answer-back Buzzer do not Sound [08/2019 - ]: Procedure

  1. CHECK CUSTOMIZE SETTING (WIRELESS BUZZER RESP) 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Customize Setting / Wireless Door Lock.
      WIRELESS DOOR LOCK

      Tester Display Description Default Setting ECU
      Wireless Buzzer Resp Wireless buzzer response ON 0:OFF, 1:ON Main body ECU (multiplex network body ECU)

      Result

      Result Proceed to
      The customize setting is "ON" A
      The customize setting is "OFF" B

    Result: 

    PERFORM CUSTOMIZE SETTING. Refer to  CUSTOMIZE PARAMETERS [08/2019 - ] 

    Result: 

    See step  2

  2. CHECK WIRELESS DOOR LOCK CONTROL SYSTEM 
    1. Check that the function operates normally.

      Refer to OPERATION CHECK [08/2019 - ]

      Result

      Result Proceed to
      Wireless door lock function operates normally A
      Wireless door lock function does not operate normally B

    Result: 

    GO TO PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [08/2019 - ] 

    Result: 

    See step  3

  3. READ VALUE USING TECHSTREAM (EACH UNLOCK DETECTION SWITCH) 
    1. Enter the following menus: Body Electrical / Main Body / Data List.
    2. Read the Data List according to the display on the Techstream.
      MAIN BODY

      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      FR Door Lock Pos Front door RH unlock detection switch signal UNLOCK or LOCK UNLOCK: Front door RH unlocked
      LOCK: Front door RH locked
      -
      FL Door Lock Pos Front door LH unlock detection switch signal UNLOCK or LOCK UNLOCK: Front door LH unlocked
      LOCK: Front door LH locked
      -
      RR-Door Lock Pos SW Rear door RH unlock detection switch signal OFF or ON OFF: Rear door RH locked
      ON: Rear door RH unlocked
      -
      RR-Door Lock Pos SW Rear door LH unlock detection switch signal OFF or ON OFF: Rear door LH locked
      ON: Rear door LH unlocked
      -

      OK

      The Techstream display changes correctly in response to the lock/unlock operation.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    GO TO LIGHTING SYSTEM (Proceed to Door Unlock Detection Switch Circuit). Refer to  Door Unlock Detection Switch Circuit [08/2019 - ] 

    Result: 

    OK 

    See step  4

  4. PERFORM ACTIVE TEST USING TECHSTREAM (WIRELESS BUZZER) 
    1. Enter the following menus: Body Electrical / Main Body / Active Test.
    2. Perform Active Test according to the display on the Techstream.
      MAIN BODY

      Tester Display Measurement Item Control Range Diagnostic Note
      Wireless Buzzer Wireless door lock buzzer OFF/ON -

      Result

      Result Proceed to
      Wireless door lock buzzer does not sound A
      Wireless door lock buzzer sounds B

    Result: 

    GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (NO ANSWER-BACK). Refer to  No Answer-Back [08/2019 - ] 

    Result: 

    REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY). Refer to  REMOVAL [08/2019 - 08/2021]  , or refer to  REMOVAL [08/2021 - ]