Installation [06/2018 - 08/2020]: Procedure

INSTALL TILT AND TELESCOPIC SWITCH
1. Engage the claw to install the tilt and telescopic switch.
2. Connect the tilt and telescopic connector to the tilt and telescopic switch.
3. Connect the spiral cable connector to the spiral cable sub-assembly.
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
for Gasoline Model: Refer to PROCEDURE - Step 2

for HV Model: Refer to PROCEDURE - Step 2

NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Refer to INITIALIZATION [06/2018 - 10/2019] , or refer to INITIALIZATION [10/2019 - 08/2020]
INSTALL LOWER STEERING COLUMN COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 3
INSPECT SRS WARNING LIGHT
for Gasoline Model: Refer to OPERATION CHECK [06/2018 - 08/2021]

for HV Model: Refer to OPERATION CHECK [06/2018 - 08/2021]
CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
See step 17