Installation [06/2018 - ]: Procedure

INSTALL SPARK PLUG
HINT:

Perform "Inspection After Repair" after replacing a spark plug.

Refer to INITIALIZATION [06/2018 - 07/2019] , or refer to INITIALIZATION [07/2019 - 08/2020] , or refer to INITIALIZATION [08/2020 - 08/2021] , or refer to INITIALIZATION [08/2021 - ]
1. Install the 4 spark plugs to the cylinder head sub-assembly.
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
  
  NOTE:
  If a spark plug has been struck or dropped, replace it.
  
  HINT:
  
  Install the same parts to their original positions.
INSTALL IGNITION COIL ASSEMBLY
Refer to PROCEDURE - Step 2
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 46 [06/2018 - 08/2021] , or refer to PROCEDURE - Step 47 [08/2021 - ]
PERFORM INITIALIZATION
1. Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.
  Refer to INITIALIZATION [06/2018 - 07/2019] , or refer to INITIALIZATION [07/2019 - 08/2020] , or refer to INITIALIZATION [08/2020 - 08/2021] , or refer to INITIALIZATION [08/2021 - ]