Rear Differential Carrier Assembly (For Torque Vectoring Differential)
REAR DIFFERENTIAL CARRIER ASSEMBLY (FOR TORQUE VECTORING DIFFERENTIAL)
| Rear drive shaft oil seal installation depth | -0.5 to 0.5 mm (-0.0197 to 0.0196 in.) |
| Differential ring gear runout | 0.05 mm (0.00197 in.) |
| Differential ring gear backlash | 0.08 to 0.13 mm (0.00315 to 0.00511 in.) |
| Differential side gear backlash | 0 mm (0 in.) |
| Differential drive pinion runout | 0.08 mm (0.00315 in.) |
| Total preload | 4.38 N*m (45 kgf*cm, 39 in.*lbf) or less |