Caution / Notice / Hint

NOTE:

Inspect the fuses for circuits related to this system before performing the following procedure.
When a power window regulator motor assembly is replaced or removed and reinstalled, it requires initialization.
Refer to INITIALIZATION [09/2014 - ]
When the sliding roof ECU (sliding roof drive gear sub-assembly) is replaced or removed and reinstalled, it requires initialization (w/ Sliding Roof System).
Refer to INITIALIZATION [09/2014 - ]
Before performing the inspection, check that DTC B1206, B1273, B2321 or B2322 is not output.
Refer to DTC CHECK / CLEAR [09/2014 - ]
Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
Refer to REGISTRATION [09/2014 - 03/2019] , or refer to REGISTRATION [03/2019 - 09/2020] , or refer to REGISTRATION [09/2020 - 01/2023] , or refer to REGISTRATION [01/2023 - ]