DTC B2782: Power Source Control ECU Malfunction [10/2022 - 10/2023]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
5. Check for DTCs.

   Body Electrical > Smart Access > Trouble Codes 

   Result

   Result	Proceed to
   DTC B2785 is not output.	A
   DTC B2785 is output.	B

Result: 

B 

GO TO LIN COMMUNICATION SYSTEM (DTC B2785). Refer to  DTC B2785: Communication Malfunction between ECUs Connected by LIN [10/2022 - 10/2023] 

Result: 

A 

See step  2

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Smart Key / Clear DTCs.
5. Clear the DTCs.

   Body Electrical > Smart Access > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
5. Check for DTCs.

   Body Electrical > Smart Access > Trouble Codes 

   Result

   Result	Proceed to
   DTC is output	A
   DTC is not output	B

Result: 

A 

REPLACE ID CODE BOX (IMMOBILISER CODE ECU). Refer to  REMOVAL [10/2022 - 10/2023] 

Result: 

B 

END