Removal [09/2020 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2024 Lexus IS 500, 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 500, and 2023 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE REAR WHEEL
Refer to PROCEDURE - Step 1

REMOVE REAR SPEED SENSOR

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Disconnect the rear speed sensor connector from the parking brake wire assembly.

NOTE:

Remove any dirt or foreign matter on and around the rear speed sensor connector before performing this step.
Do not allow water, oil or dirt to enter the rear speed sensor connector.

Remove the bolt and the rear speed sensor from the rear axle carrier sub-assembly.

NOTE:

Keep the tip of the rear speed sensor and installation hole free of foreign matter.
Do not rotate or apply excessive force to the rear speed sensor when removing it from the rear axle carrier sub-assembly. Rotating or applying excessive force may result in damage to the rear speed sensor.