Customize Parameters [03/2017 - ]
- CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Tilt & Telescopic / Utility / Customize.
- Select the setting by referring to the table below.
Tilt & Telesco
Tester Display Description Default Setting ECU Autoaway/Return Operation Setting Turn the auto away/return function Tilt ON $0000:Tilt&Telescopic OFF,$0001:Telescopic ON,$0010:Tilt ON,$0011:Tilt&Telescopic ON Multiplex tilt and telescopic ECU
- Customizing with Mult-display
- Turn the engine switch on (IG).
- Select the setting by referring to the table below.
- Select the following menus: Setup / Vehicle / Vehicle Customization / Other Vehicle Settings.
- Select the setting by referring to the table below.OTHER VEHICLE SETTINGS
Display Description Default Setting ECU Steering Column Easy-Exit Turn the auto away/return function Tilt Only Tilt Only / Telescopic Only / Tilt & Telescopic / Off Multiplex tilt and telescopic ECU