LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> IS 350 Base, AWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Suspension Control System - Service Information >> ABSORBER CONTROL ACTUATOR (for Rear Side) >> Inspection [04/2013 - 09/2020] >> Procedure

Inspection [04/2013 - 09/2020]: Procedure

  1. INSTALL ABSORBER CONTROL ACTUATOR 
    1. Measure the resistance according to the value(s) in the table below.
      GTY467157Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for LH
      *B for RH
      *a Component without harness connected
      (Absorber Control Actuator)

      Standard Resistance

      FOR LH

      Tester Connection Condition Specified Condition
      1 (RBL+) - 3 (E RL) Always 12.0 to 12.8 Ω
      2 (RAL+) - 3 (E RL) Always 12.0 to 12.8 Ω
      4 (RBL-) - 3 (E RL) Always 12.0 to 12.8 Ω
      5 (RAL-) - 3 (E RL) Always 12.0 to 12.8 Ω
      FOR RH

      Tester Connection Condition Specified Condition
      1 (RBR+) - 3 (E RR) Always 12.0 to 12.8 Ω
      2 (RAR+) - 3 (E RR) Always 12.0 to 12.8 Ω
      4 (RBR-) - 3 (E RR) Always 12.0 to 12.8 Ω
      5 (RAR-) - 3 (E RR) Always 12.0 to 12.8 Ω
    2. Check absorber control actuator operation.

      Refer to OPERATION CHECK [04/2013 - 09/2020]

scientia non olet · About LEMON Manuals