LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> UX 200 Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision (Diagnostics - Introduction) >> Pre-Collision System >> Customize Parameters [10/2018 - ] >> Customize Parameters [10/2018 - ]

Customize Parameters [10/2018 - ]

  1. CUSTOMIZE PRE-COLLISION SYSTEM 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Customizing with the Multi-information Display
      1. Turn the ignition switch to ON.
      2. Enter the following menus: Settings Tab / Settings / Pre-collision System Settings.
      3. Select the setting by referring to the table below.
      4. Using the steering pad switches, change the customize settings.
        PRE-COLLISION SYSTEM SETTINGS

        Display Description Setting Default
        PCS Turns the pre-collision system function on/off. ON/OFF ON
        Sensitivity Sets the pre-collision system function warning sensitivity Early/Middle/Late Middle
    2. Customizing with the Techstream

      HINT: 

      The following items can be customized.

      1. Connect the Techstream to the DLC3.
      2. Turn the ignition switch to ON.
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Others.
      5. Select the setting by referring to the table below.

        Others 

        Tester Display Description Default Setting ECU
        PCS Function ON/OFF State Stored Refer to the table below Not Stored $00:Not Stored,$01:Stored Forward recognition camera
        PCS Warning Timing State Stored 1 Refer to the table below Not Stored $00:Not Stored,$01:Stored Forward recognition camera
        PCS Warning Timing State Stored 2 Refer to the table below Stored $00:Not Stored,$01:Stored Forward recognition camera
        PCS Warning Timing State Stored 3 Refer to the table below Not Stored $00:Not Stored,$01:Stored Forward recognition camera
        Customize Setting Description Setting
        PCS Function ON/OFF State Stored Function to maintain the pre-collision system on/off setting when the ignition switch is turned to ON from off. Not stored: Pre-collision system always turns on
        Stored: Pre-collision system maintains previous setting
        PCS Warning Timing State Stored 1 Function to set whether or not to store the warning sensitivity setting when the PCS function is turned from off to on while the ignition switch is ON. Not stored: Sensitivity setting is reset to Middle
        Stored: Sensitivity settings are maintained as previous value
        PCS Warning Timing State Stored 2 Function to set whether or not to store the warning sensitivity setting when the PCS function is on and the ignition switch is turned from off to ON. Not stored: Sensitivity setting is reset to Middle
        Stored: Sensitivity settings are maintained as previous value
        PCS Warning Timing State Stored 3 Function to set whether or not to store the warning sensitivity setting when the PCS function is off and the ignition switch is turned from off to ON. Not stored: Sensitivity setting is reset to Middle
        Stored: Sensitivity settings are maintained as previous value
scientia non olet · About LEMON Manuals