LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> UX 200 Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System (Diagnostics - Introduction) >> Wiper And Washer System >> DTC Check / Clear [10/2018 - ] >> DTC Check / Clear [10/2018 - ]

DTC Check / Clear [10/2018 - ]

  1. CHECK FOR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / (desired system) / Trouble Codes.

      Body Electrical > Wiper > Trouble Codes 

      Body Electrical > Main Body > Trouble Codes 

      Body Electrical > Rain and/or Humidity Sensor > Trouble Codes 

    5. Check for DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / (desired system) / Trouble Codes.

      Body Electrical > Wiper > Clear DTCs 

      Body Electrical > Main Body > Clear DTCs 

      Body Electrical > Rain and/or Humidity Sensor > Clear DTCs 

    5. Clear the DTCs.
scientia non olet · About LEMON Manuals