LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> UX 200 Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) System (K120) (Diagnostic Codes) (2 Of 2) & Circuit Tests) >> Continuously Variable Transaxle System >> DTC P1589-00: Acceleration Sensor Learning Value [10/2018 - 07/2022] >> Description

DTC P1589-00: Acceleration Sensor Learning Value [10/2018 - 07/2022]: Description

The TCM stores this DTC if Deceleration Sensor Zero Point Calibration has not been performed or has failed after system components, such as the TCM, have been replaced.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P158900 Acceleration Sensor Learning Value Either of the following conditions is met (1-trip detection logic):
  • When the vehicle speed is 2 km/h (1 mph) or more, Deceleration Sensor Zero Point Calibration has not been completed.*1
  • When Deceleration Sensor Zero Point Calibration is performed, the learned values are abnormal (out of normal range).*2
DTC Detection Condition *1:
  1. Deceleration Sensor Zero Point Calibration has not been performed.

DTC Detection Condition *2:
  • Vehicle was not stable during Deceleration Sensor Zero Point Calibration.
  • Yaw rate and acceleration sensor (Airbag ECU assembly)
  • TCM
Does not come on DTC stored SAE Code:
P1589
DTC DETECTION CONDITION PATTERNS:

  Vehicle Condition
Pattern 1 Pattern 2
Diagnostic Condition The vehicle speed is 2 km/h (1 mph) or more -
Deceleration Sensor Zero Point Calibration has been performed -
Malfunction Condition Deceleration Sensor Zero Point Calibration has not been completed -
The learned values are abnormal (out of normal range) -
Duration - -
Detection Logic 1-trip detection logic 1-trip detection logic

HINT: 

This DTC is stored when either of the above detection patterns is met.