LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> UX 200 Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) System (K120) (Diagnostic Codes) (2 Of 2) & Circuit Tests) >> Continuously Variable Transaxle System >> DTC P1585-04: Acceleration Sensor Circuit System Internal Failure [10/2018 - 07/2022] >> Description

DTC P1585-04: Acceleration Sensor Circuit System Internal Failure [10/2018 - 07/2022]: Description

The yaw rate and acceleration sensor is built into the airbag ECU assembly. The airbag ECU assembly sends yaw rate and acceleration sensor signals to the TCM via CAN communication. These signals are used for neutral control. If a yaw rate and acceleration sensor malfunction signal is received from the airbag ECU assembly, this DTC is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P158504 Acceleration Sensor Circuit System Internal Failure Yaw rate and acceleration sensor malfunction signal (abnormal yaw rate and acceleration sensor value) is received from the airbag ECU assembly for 3 seconds or more (1 trip detection logic).
  • Yaw rate and acceleration sensor (Airbag ECU assembly)
  • CAN communication system
  • Wire harness or connector
  • TCM
Does not come on DTC stored SAE Code:
P1585