DTC P0705-13: Transmission Range Sensor "A" Circuit Open; DTC P070562: Transmission Range Sensor "A" Signal Compare Failure [10/2018 - 07/2022]: Description

The park/neutral position switch and transmission control switch (shift lock control unit assembly) detect the shift lever position and send signals to the TCM.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P070513	Transmission Range Sensor "A" Circuit Open	P, R, N and D input signals are all OFF simultaneously for 60 seconds or more (2-trip detection logic).	Wire harness or connector Park/neutral position switch TCM	Comes on	DTC stored	SAE Code: P0705
P070562	Transmission Range Sensor "A" Signal Compare Failure	Either of the following conditions is met for 2 seconds or more (2-trip detection logic). 2 or more of the following signals are ON simultaneously1: P or N input signal R input signal D input signal Any of the following signals are ON simultaneously with the shift lever in M2: P input signal R input signal N input signal	Wire harness or connector Park/neutral position switch Transmission control switch (Shift lock control unit assembly) TCM	Comes on	DTC stored	SAE Code: P0705

DTC DETECTION CONDITION PATTERNS (P070562*1):

		Vehicle Condition
		Pattern 1	Pattern 2	Pattern 3	Pattern 4	Pattern 5
Diagnostic Condition	Engine switch is on (IG)	◦	◦	◦	◦	◦
Diagnostic Condition	Auxiliary battery voltage is 8 V or more	◦	◦	◦	◦	◦
Malfunction Condition	P input signal is ON	◦	◦	-	-	-
	R input signal is ON	◦	-	◦	-	◦
	N input signal is ON	-	-	◦	◦	-
	D input signal is ON	-	◦	-	◦	◦
Duration		2 seconds or more	2 seconds or more	2 seconds or more	2 seconds or more	2 seconds or more
Detection Logic		2-trip detection logic	2-trip detection logic	2-trip detection logic	2-trip detection logic	2-trip detection logic

DTC DETECTION CONDITION PATTERNS (P070562*2):

		Vehicle Condition
		Pattern 1	Pattern 2	Pattern 3
Diagnostic Condition	Engine switch is on (IG)	◦	◦	◦
Diagnostic Condition	Auxiliary battery voltage is 8 V or more	◦	◦	◦
Malfunction Condition	P input signal is ON	◦	-	-
	R input signal is ON	-	◦	-
	N input signal is ON	-	-	◦
	M input signal is ON	◦	◦	◦
Duration		2 seconds or more	2 seconds or more	2 seconds or more
Detection Logic		2-trip detection logic	2-trip detection logic	2-trip detection logic

HINT:

DTC P070562 is stored when any of the above detection patterns is met.