Typical Malfunction Thresholds
CASE 1
| Following condition is met | 2 data areas or more |
| One of the following conditions is met | More than 3 times |
| - EEPROM access error | Occurred |
| - Permanent fault code | Not stored |
| - Permanent fault code | Not equal to commanded fault code |
CASE 2
| Following condition is met | 2 data areas or more |
| One of the following conditions is met | More than 3 times |
| - EEPROM access error | Occurred |
| - Permanent fault code | Stored |
CASE 3
| Either of the following conditions is met | 1 or 2 |
| 1. Following condition is met | 2 data areas or more |
| EEPROM access error occurred | More than 3 times |
| 2. Following condition is met | More than 10 times |
| Permanent fault code data | Mismatch |