LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> UX 200 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Dynamic Radar Cruise Control System (Diagnostic Codes & Circuit Tests) (Except Hybrid) >> DYNAMIC RADAR CRUISE CONTROL SYSTEM (for Gasoline Model) >> DTC U0318-57: Software Incompatibility with Brake System Control Module Invalid/Incompatible Software Component [10/2018 - 07/2022] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • When replacing the forward recognition camera, replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
  • If the forward recognition camera has been replaced with a new one, it is necessary to perform forward recognition camera adjustment.

    HINT: 

    Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.

    One Time Recognition: Refer to ADJUSTMENT (ONE TIME RECOGNITION) [10/2018 - 07/2022]

    Sequential Recognition: Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [10/2018 - 07/2022]