Installation [10/2015 - 03/2018]: Procedure

INSTALL STEERING HEATER SWITCH (INTEGRATION CONTROL AND PANEL ASSEMBLY)
1. Engage the 4 claws to install the steering heater switch (integration control and panel assembly).
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 33 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 33 [12/2017 - 03/2018]
CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 34 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 34 [12/2017 - 03/2018]
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 35 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 35 [12/2017 - 03/2018]
INSTALL COWL SIDE TRIM BOARD LH
Refer to PROCEDURE - Step 2 [10/2015 - 03/2018]
INSTALL FRONT DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 43 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 42 [12/2017 - ]
INSTALL INSTRUMENT PANEL GARNISH LH
Refer to PROCEDURE - Step 38 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 38 [12/2017 - 03/2018]