LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> RC F >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System (Ext) - Service Information >> Rear Combination Light Assembly >> Inspection [09/2014 - ] >> Procedure

Inspection [09/2014 - ]: Procedure

  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH 
    1. Apply battery voltage to the rear combination light assembly LH and check that the lights come on.
      GTY510955Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Rear Combination Light Assembly LH)

      OK

      Condition Specified Condition
      Battery positive (+) → Terminal 2 (STP)
      Battery negative (-) → Terminal 3 (E)      		 Stop light comes on
      Battery positive (+) → Terminal 1 (TL)
      Battery negative (-) → Terminal 3 (E)      		 Taillight and rear side marker light come on

      If the result is not as specified, repair or replace the rear combination light assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH 
    1. Apply battery voltage to the rear combination light assembly RH and check that the lights come on.
      GTY510954Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Rear Combination Light Assembly RH)

      OK

      Condition Specified Condition
      Battery positive (+) → Terminal 2 (STP)
      Battery negative (-) → Terminal 3 (E)      		 Stop light comes on
      Battery positive (+) → Terminal 1 (TL)
      Battery negative (-) → Terminal 3 (E)      		 Taillight and rear side marker light come on

      If the result is not as specified, repair or replace the rear combination light assembly RH.

scientia non olet · About LEMON Manuals