LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> RC 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Automatic Headlight Beam Level Control System (Single Beam Headlight) - Diagnostics - Introduction) >> AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM (for Single Beam Headlight) >> System Description [11/2017 - 10/2018] >> System Description [11/2017 - 10/2018]

System Description [11/2017 - 10/2018]

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Lexus RC 350, 2018 Lexus RC 300, 2017 Lexus RC 350, 2017 Lexus RC 300, and 2017 Lexus RC 200t. However, it is still accessible from the selected car via links, so may be relevant.
  1. AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL 
    1. General

      The automatic headlight beam level control system ensures forward visibility and prevents dazzling of drivers in oncoming and preceding vehicles by controlling the headlight beam level vertically when the weight of passengers and loads has caused the vehicle attitude to change.

    2. Function of Main Components
      Component Outline
      Headlight Leveling ECU Assembly Receives various signals, calculates changes in the vehicle posture, and actuates the headlight leveling motor.
      Headlight Leveling Motor Based on the signals received from the headlight leveling ECU assembly, the motors move the reflectors in the headlight to change the low beam angle.
      Rear Height Control Sensor Sub-assembly LH Transmits a height control sensor signal to the headlight leveling ECU assembly.
      Brake Actuator Assembly (Skid Control ECU) Transmits a speed sensor signal to the headlight leveling ECU assembly.
      ECM Transmits an engine running status signal to the headlight leveling ECU assembly.
      Main Body ECU (Multiplex Network Body ECU) Transmits a headlight status signal.
      Combination Meter Assembly If the system malfunctions, "Headlight System Malfunction Visit Your Dealer" warning message will be displayed on the multi-information display in the combination meter assembly in accordance with the signal from the headlight leveling ECU assembly.