LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> RC 350 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Audio / Video System - Diagnostics - Introduction (2 Of 4) >> Audio And Visual System >> Customize Parameters [11/2017 - ] >> Customize Parameters [11/2017 - ]

Customize Parameters [11/2017 - ]

  1. CUSTOMIZING WITH REMOTE TOUCH (REMOTE OPERATION CONTROLLER ASSEMBLY) 
    1. Customizing with the touch function cancellation function. (w/ Touch Function Cancellation Function)
      NOTE:

      Confirm the touchpad surface is free of foreign matter before customizing.

      1. Turn the engine switch on (ACC).
      2. Simultaneously press and hold the "HOME" switch and "BACK" switch for 5 seconds or more.
        GTY835074Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a "HOME" Switch
        *b "BACK" Switch
      3. While pressing and holding the "HOME" switch and "BACK" switch, tap the touchpad with 2 fingers.
        GTY823780Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Example

        HINT: 

        • If any switch other than the "HOME" switch or "BACK" switch is pressed, the customize setting cannot be changed.
        • Do not pinch in/out or slide fingers when tapping the touchpad with 2 fingers.
      4. Confirm that the answer-back function vibrates the touchpad a specified number of times to indicate that the setting has changed.
        SETTING

        Touch Function Cancellation Function Number of Answer Back Vibrations
        Off
        (Default)        		 1
        On 2
      5. Repeat step (3) until the desired setting is selected.

        HINT: 

        The touch function cancellation function alternates between on and off.

      6. Release the "HOME" switch and "BACK" switch to select the set value.
scientia non olet · About LEMON Manuals