LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> NX 300 Base, AWD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column - Service Information >> Steering Wheel >> Installation [09/2017 - ] >> Procedure

Installation [09/2017 - ]: Procedure

  1. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY (w/ Steering Heater) 

    See step  1

  2. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) 

    Refer to PROCEDURE - Step 1 [09/2017 - ]

  3. INSTALL STEERING SHAKE DAMPER 
    1. Install the 2 screws and steering shake damper to the steering wheel assembly.
  4. INSTALL STEERING PAD SWITCH ASSEMBLY 

    See step  1

  5. INSTALL CRUISE CONTROL MAIN SWITCH 

    Refer to PROCEDURE - Step 1 [09/2017 - ]

  6. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  7. ADJUST SPIRAL CABLE 

    Refer to PROCEDURE - Step 7 [09/2017 - 05/2019] , or refer to PROCEDURE - Step 7 [05/2019 - ]

  8. INSTALL STEERING WHEEL ASSEMBLY 
    1. Align the matchmarks on the steering wheel assembly and steering main shaft to install the steering wheel assembly.
    2. Install the steering wheel assembly set nut.

      Torque: 50 N*m (510 kgf*cm, 37 ft.*lbf) 

    3. Connect the connector.
    4. Connect the 2 connectors to the spiral cable with sensor sub-assembly.
  9. INSTALL STEERING PAD 

    Refer to INSTALLATION [10/2014 - 05/2019] , or refer to INSTALLATION [05/2019 - 07/2020] , or refer to INSTALLATION [07/2020 - ]

scientia non olet · About LEMON Manuals