LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> LS 500 Base, AWD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column - Service Information >> Steering Column Assembly >> Inspection [12/2017 - ] >> Procedure

Inspection [12/2017 - ]: Procedure

  1. INSPECT TILT MOTOR 
    1. Apply 12 V battery voltage to the tilt motor connector. Then check the steering wheel tilt operation.
      GTY792332Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Tilt Motor)

      OK

      Tester Connection Specified Condition
      • 12 V battery positive (+) lead → Terminal G32-2 (TIM-)
      • 12 V battery negative (-) lead → Terminal G32-1 (TIM+)
      		 The steering wheel tilts down.
      • 12 V battery positive (+) lead → Terminal G32-1 (TIM+)
      • 12 V battery negative (-) lead → Terminal G32-2 (TIM-)
      		 The steering wheel tilts up.
  2. INSPECT TELESCOPIC MOTOR 
    GTY776061Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *a Component without harness connected
    (Telescopic Motor)
    1. Apply 12 V battery voltage to the telescopic motor connector. Then check the steering column telescopic operation.

      OK

      Tester Connection Specified Condition
      • 12 V battery positive (+) lead → Terminal G23-4 (TEM+)
      • 12 V battery negative (-) lead → Terminal G23-1 (TEM-)
      		 The steering column contracts.
      • 12 V battery positive (+) lead → Terminal G23-1 (TEM-)
      • 12 V battery negative (-) lead → Terminal G23-4 (TEM+)
      		 The steering column extends.
scientia non olet · About LEMON Manuals