Caution / Notice / Hint

NOTE:

The seat position will not be stored if the SET switch and 2 or more of the seat memory switches (for example, M1 switch and M2 switch) are pressed simultaneously.
If a memorizing operation has failed, release all switches. The seat memory function does not operate unless the switches are released.
The seat will not return to the memorized position if 2 or more of the seat memory switches (for example, M1 switch and M2 switch) are pressed simultaneously.
If a restoring operation has failed, release all switches. The seat memory restoring function does not operate unless the switches are released.
The front power seat control system uses the CAN communication system. First, confirm that there is no malfunction in the CAN communication system. Refer to the How to Proceed with Troubleshooting procedure.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2023 - ]
Before replacing the main body ECU (multiplex network body ECU) or certification ECU (smart key ECU assembly), refer to the SmartAccess System with Push-button Start (for Start Function).
Refer to REGISTRATION [10/2023 - ]
Initializing the position control ECU assembly will clear the seat position memory.

HINT:

Make sure to initialize the position control ECU assembly and No. 2 position control ECU assembly after replacing the position control ECU assembly and No. 2 position control ECU assembly, seat assembly orany related parts (including removal and installation).
Before initializing the seat ECU, make sure that the D/C CUT fuse is normal.
When any of the following conditions are met, the seat position Information in the position control ECU assembly will be cleared.
- The engine switch is turned off with any of the seat switches being operated and the D/C CUT fuse removed.
- The engine switch is turned off within 1 second of any of the seat switches being operated with the D/C CUT fuse removed.