Front Camera Module Communication Stop Mode [10/2022 - 10/2023]: Description
| Detection Item |
Symptom |
Trouble Area |
| Front Camera Module Communication Stop Mode |
Any of the following conditions are met:
- Communication stop for "Front Camera Module" is indicated on the "Communication Bus Check" screen of the Techstream.
Refer to DIAGNOSIS SYSTEM [10/2022 - 10/2023]
- Communication stop history for "Front Camera Module" is indicated on the "Communication Bus Check (Detail)" screen of the Techstream. (The Lost Communication Time value for "Front Camera Module" is 6 or more.)
Refer to PROBLEM SYMPTOMS TABLE [10/2020 - 10/2023]
- Communication system DTCs (DTCs that start with U) that correspond to "Front Camera Module Communication Stop Mode" in "DTC Combination Table" are output.
Refer to DTC COMBINATION TABLE [10/2022 - 10/2023]
|
- Forward recognition camera branch wire or connector*1
- Power source circuit of forward recognition camera*1
- Forward recognition camera ground circuit*1
- Forward recognition camera*1
- Object recognition camera branch wire or connector*2
- Power source circuit of object recognition camera*2
- Object recognition camera ground circuit*2
- Object recognition camera*2
|
*1: w/ Pre-collision System (for Mono Camera Type)
*2: w/ Pre-collision System (for Stereo Camera Type)