LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> IS 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Panoramic View Monitor System - Diagnostics - Introduction) >> Panoramic View Monitor System >> Initialization [09/2020 - ] >> Initialization [09/2020 - ]

Initialization [09/2020 - ]

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2024 Lexus IS 500, 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 500, and 2023 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INITIALIZE PANORAMIC VIEW MONITOR SYSTEM 
    1. When "!" is displayed on the multi-display assembly, correct the steering angle neutral point using the following method.
      1. Fully turn the steering wheel to the left and right on level ground.
        NOTE:

        Memorizing the steering angle neutral point must be carried out with the hybrid system operating. Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.

        HINT: 

        If the steering angle neutral point cannot be memorized by fully turning the steering wheel to the left and right, perform Steering Angle Setting in Calibration.

        Refer to CALIBRATION [09/2020 - ] 

scientia non olet · About LEMON Manuals