LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> IS 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Panoramic View Monitor System - Diagnostics - Introduction) >> Panoramic View Monitor System >> DTC Check / Clear [09/2020 - ] >> DTC Check / Clear [09/2020 - ]

DTC Check / Clear [09/2020 - ]

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2024 Lexus IS 500, 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 500, and 2023 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the GTS to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the GTS on.
    4. Enter the following menus: Chassis / Circumference Monitoring Camera Control Module / Trouble Codes.

      Chassis > Circumference Monitoring Camera Control Module > Trouble Codes 

    5. Check the details of the DTCs.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2020 - ] 

  2. CLEAR DTC 
    1. Connect the GTS to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the GTS on.
    4. Enter the following menus: Chassis / Circumference Monitoring Camera Control Module / Trouble Codes.

      Chassis > Circumference Monitoring Camera Control Module > Clear DTCs 

    5. According to the display on the GTS, select the trouble code data display with the clear button.
scientia non olet · About LEMON Manuals