Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier [08/2015 - 08/2021]: Procedure

1. Disconnect the H22 stereo component amplifier assembly connector.
2. Disconnect the H2 multi-media module receiver assembly connector.
3. Measure the resistance according to the value(s) in the table below.

   Standard Resistance

   Tester Connection	Condition	Specified Condition
   H2-1 (FR+) - H22-5 (R+)	Always	Below 1 Ω
   H2-2 (FL+) - H22-3 (L+)	Always	Below 1 Ω
   H2-5 (FR-) - H22-4 (R-)	Always	Below 1 Ω
   H2-6 (FL-) - H22-2 (L-)	Always	Below 1 Ω
   H22-6 (SLD) - Body ground	Always	10 kΩ or higher
   H2-1 (FR+) - Body ground	Always	10 kΩ or higher
   H2-2 (FL+) - Body ground	Always	10 kΩ or higher
   H2-5 (FR-) - Body ground	Always	10 kΩ or higher
   H2-6 (FL-) - Body ground	Always	10 kΩ or higher

Result: 

OK 

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE 

(Refer to PROBLEM SYMPTOMS TABLE [08/2015 - 08/2019] , or refer to PROBLEM SYMPTOMS TABLE [08/2019 - 08/2021] )

Result: 

NG 

REPAIR OR REPLACE HARNESS OR CONNECTOR