Installation [10/2015 - ]: Procedure

1. Install the fuel pump control ECU assembly to the ECU bracket with the 2 nuts.

   Torque: 6.0 N*m (1 kgf*cm, 53 in.*lbf) 

   NOTE:

   Do not reuse the fuel pump control ECU if it has been dropped or subjected to a severe impact.

1. Install the ECU bracket to the vehicle body with the 4 bolts.

   Torque: 8.3 N*m (5 kgf*cm, 73 in.*lbf) 

   NOTE:

   Do not reuse the fuel pump control ECU if it has been dropped or subjected to a severe impact.

2. Engage the 5 clamps and install the wire harness to the ECU bracket.
3. Connect the 2 fuel pump control ECU assembly connectors.

Refer to INSTALLATION [10/2015 - 09/2017] , or Refer to INSTALLATION [09/2017 - ]